Blowing
Applied in tubes, ducts, trays, blocks, tunnels, collecting channels, with no risk of rodent attacks. Also applied for aerial installation between supports and buildings on external strength members or using the winding method.
Ducting
Applied in ducts, trays, blocks, tunnels, collecting channels, with a risk of rodent attacks.
Direct Buried
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers.
Submarine
Applied in sea areas (coastal shelf and deep-sea), on navigable rivers, in lakes and water storage basins, in harsh environments, in bogs and unnavigable rivers.
Figure 8
Applied for aerial installations: on power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities in dielectric package.
Aerial
Applied for aerial installation on distribution and high voltage power lines, as well as railway catenary.
Indoor
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Drop
Applied for aerial installation on transmission towers, lamp posts, between buildings and constructions.
OPGW/Ground Wire
Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Fire Rated
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Specialty Cable
For fiber optic monitoring systems.
Materials
5 August 2015
Cable miniaturization is the main trend in the construction of fiber-optic networks and in telecommunications in general. The reason for this is the need to increase the efficiency of network installation and speed up the process of optics penetration.
For this purpose Corning developed innovative fiber 200 mm in diameter on the basis of the proven fiber Corning SMF-28® Ultra. New fiber Corning SMF-28® Ultra 200 hasall the advantages and characteristics of the fiber Ultra, but has smaller diameter of 200 microns, which allows to increase the fiber packing density and reduce the size of the cables themselves.
Fiber Corning SMF-28® Ultra 200 allows to lower more than 30% the space occupied by the fiber, while it has low attenuation (up to 0.18 dB / km), high resistance to bending (standard G.657A1) and standard diameter for singlemode fiber of the multimode spot of 9.2 micron.
Because of these unique characteristics Incab managed to start production of micro-cables of a new generation of 96-fiber cables for blowing in micro-tubes with the diameter of 6 mm! Application of the new fiber allowed to reduce the diameter of the cable, its material consumption and weight. In this way the consumer has the opportunity to significantly reduce the amount of space occupied in cable ducts and hence reduce operating costs.
Get familiarized with the advantages of the new fiber in this presentation.
Specification for fiber Corning SMF-28® Ultra 200.
Specification for cable micro DPO 200 microns.
Link for cable «Micro fiber 200 microns».
