Applied in tubes, ducts, trays, blocks, tunnels, collecting channels, with no risk of rodent attacks. Also applied for aerial installation between supports and buildings on external strength members or using the winding method.
Applied in ducts, trays, blocks, tunnels, collecting channels, with a risk of rodent attacks.
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers.
Applied in sea areas (coastal shelf and deep-sea), on navigable rivers, in lakes and water storage basins, in harsh environments, in bogs and unnavigable rivers.
Applied for aerial installations: on power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities in dielectric package.
Applied for aerial installation on distribution and high voltage power lines, as well as railway catenary.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Applied for aerial installation on transmission towers, lamp posts, between buildings and constructions.
Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
For fiber optic monitoring systems.
Steel optical module, clad wire and temporary optical cable.
Riser micro tube (MT) is applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing into protecting polyethylene tubes
Halogen-free flame-retardant jacket
Match marks (jacket opening marking)
Perfect solution for multi-dwelling units: a separate micro loose tube is guided to every inter-floor box. With 100% penetration, the number of micro loose tubes equals to the number of floors, the number of fibers equals to the number of flats on the floor
Operation temperature down to -30C
Easy access to fiber at any place of the cable
High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable
Allowable tensile strength up to 400 N
Resistance to crushing load — 80-200 N/сm
|Crush — 80 N/cm|
|Fiber count||up to 8 (2×4)||up to 12 (3×4)||up to 16 (4×4)||up to 24 (6×4)||up to 32 (8×4)||up to 40 (10×4)||up to 48 (12×4)||up to 64 (16×4)||up to 72 (12×6)||up to 96 (16×6)||up to 144 (24×6)||up to 288 (24×12)|
|Cable diameter, mm||6.5||6.5||6.5||8.5||8.5||8.5||10.5||10.5||10.5||13.5||13.5||14.5|
|Cable weight, kg/km||39.4||40.4||41.3||57.4||59.3||61.3||77.4||81.2||81.0||130.8||141.0||160.9|
|Min bending radius, mm||65||65||65||85||85||85||105||105||105||135||135||145|
|Transportation and storage temperature||-50°С…+50°С|
|Minimum bending radius||10x cable diameter|
|Life time||25 years|